Sound undisturbed asbestos does not always justify removal. Asbestos encapsulation binds fibres, extends safe life and costs a fraction of removal. Garage roofs, risers and coatings are the typical candidates.
Encapsulant is matched to material: penetrating sealers for friable surfaces, elastomeric for cement, barriers where impact matters. Applied under controls and documented fully on every job.
Surface prep is disturbance, treated as such
Labelling and register entries both included
From suitability assessment to labelled, scheduled handover, every encapsulation job is documented to the same standard as removal, because a sealed material is still a managed one.
Condition, adhesion and disturbance risk are assessed honestly before any product is specified. Where the material is not suitable for encapsulation, we say so and the removal price is the right answer. We will not seal failing material.
The product system, coverage rate, any relevant colour options and the maintenance expectation, all in one written figure. The removal price is quoted alongside so the comparison is yours to make with real numbers.
The area is protected, the surface prepared under appropriate asbestos controls, and the encapsulant applied to specification with the number of coats and coverage rate recorded.
Treated areas are labelled, the register is updated with the product name and application date, and the reinspection schedule is set. Encapsulation is a managed state, not a final destination.
We will not apply a sealant to material that should be removed. Short-term revenue from an unsuitable job creates your long-term problem, not ours.
The encapsulation and removal costs sit side by side in your quotation so you are choosing between real alternatives, not accepting a single presented option.
Labels, register entries and reinspection dates are included in every encapsulation job, not available as optional add-ons.
Our monitoring programme keeps the condition of the seal, and the validity of the strategy, under regular review.
FAQS
It is fully legitimate under the Control of Asbestos Regulations 2012 for sound material that will be actively managed thereafter. It is standard practice in schools, residential blocks and commercial buildings across the country. The version that becomes a problem is encapsulation without documentation. Everything we apply comes labelled, registered and scheduled for reinspection.
It depends on the product system and the material it is applied to, but correctly specified and applied coatings on suitable material typically perform well for many years. The specification names the product, states the expected maintenance cycle and sets the inspection dates. That is what you can hold us to.
Yes. Encapsulation does not make future removal more complicated. The coating comes off with the sheets under the same controls as any other removal. What it does is buy a sound roof years of additional safe service before that cost is incurred.
Properly documented encapsulation with a current register entry and an inspection record is generally read as competent, responsible management. It is far preferable to undocumented material of any description. The paperwork is what replaces uncertainty with a clear, auditable position.
Frequently a quarter to a half of the removal cost, depending on the material and the system required. That is precisely why the two prices belong in the same quotation. We produce both so you can make the comparison on actual figures rather than estimates.
Yes. Encapsulated asbestos is managed asbestos. Asbestos monitoring at a minimum annually, adjusted for risk, confirms that the seal remains intact and the material is stable. Our monitoring programme manages the schedule, the photographic records and the register updates.
The system is determined by the material. Penetrating sealers where loose fibre needs binding. Elastomeric coatings where cement requires bridging and protection from weathering. Rigid barriers where the primary concern is impact. The specification names the specific product, the coverage rate and the maintenance cycle. There is no unnamed or generic product applied without documentation.
Yes, provided the coating is in sound condition and well bonded to the substrate. Sealing followed by over-skimming is a recognised and properly documented route that avoids removal altogether. The condition assessment comes first and the register entry is what makes the outcome honest and transferable.
We carry out asbestos removal across Kent, covering garage roofs across residential areas, riser panels in commercial buildings and coatings in period properties county-wide. The removal price is always quoted alongside so the decision is made with both options visible.
For enquiries related to our services, please reach out.
[email protected]
[email protected]
Speak to a surveyor, not a call handler.
Sales
07798 984290
Support / Enquiries
07468 437558
2 Park Rd
Guildford GU1 4PH
United Kingdom
CONTACT US
Send us your postcode and a description of the material you’ve found. A surveyor will be with you the same week, and your fixed written price follows within 48 hours.
